Manufacturer

  1. Knobloch (2)
  2. Wesco (7)
  3. GNS (6)

Casting & Injection

List 
Grid 
  • By Life Tone. Injection Grade. Used to plump up bird feet and other parts. Renew that natural plump look to your bird feet! Sets in 8-12 hours. 32oz bottles

    FC-16-32
    $63.00
  • By Life Tone. Injection Grade. Used to plump up bird feet and other parts. Renew that natural plump look to your bird feet! Sets in 8-12 hours. 8oz Bottles

    FC-16-8
    $25.85
  • By Life Tone. Injection Grade. Used to plump up bird feet and other parts. Renew that natural plump look to your bird feet! Sets in 8-12 hours. 4oz Bottles

    FC-4-8
    $13.95
  • High Strength fluid sets up in approximately 4 minutes. 32oz Bottles

    FC32
    $56.50
  • High Strength fluid sets up in approximately 4 minutes. 4oz Bottles

    FC4
    $13.65
  • High Strength fluid sets up in approximately 4 minutes. 8oz Bottles

    FC8
    $25.85
  • Latex Molding Rubber by Envirotex A unique compound. Simply brush on and dry. Several layers produce a perfect flexible mold into which casting material can be poured. Makes an excellent detailed copy of the original. Not freeze-thaw stable.

    S-242
    $15.45
  • Latex-74 Gallon Mold making latex rubber of superior stength and quality. For making brush-on molds, not for pouring. One coat of this is equal to 3-5 coats of similar products. Store above 45 degrees. Not freeze-thaw stable.

    S-2427
    $64.40
  • Latex-74 Quart Mold making latex rubber of superior stength and quality. For making brush-on molds, not for pouring. One coat of this is equal to 3-5 coats of similar products. Store above 45 degrees. Not freeze-thaw stable.

    S-2428
    $28.80
  • 1 Quart Latex Relesase Dressing Used on latex rubber molds when chemically curing materials are used to cast parts. Protects rubber and allows parts to be demolded easily. Will prolong mold life.

    S-2429
    $15.95
  • Mold All-RTV Silicone - 1 pound kit High grade RTV silicone based rubber. Normal set time is 24 hours. A truly superior product to use when molding or casting a highly detailed item. Mix 1-10 by weight until consistant in color. Fast set catalyst will shorten set time down to a couple of hours if desired. Non-inhibited by sulphur, sodium or epoxies, will set up against oil clay. No release is required either when making the mold or casting parts.

    S-2528
    $37.50
  • One ounce of fast set catalyst to be used with the Mold All Kits S-2528 or S-2529.

    S-2528C
    $16.40
  • Mold All-RTV Silicone - 10 pound kit High grade RTV silicone based rubber. Normal set time is 24 hours. A truly superior product to use when molding or casting a highly detailed item. Mix 1-10 by weight until consistant in color. Fast set catalyst will shorten set time down to a couple of hours if desired. Non-inhibited by sulphur, sodium or epoxies, will set up against oil clay. No release is required either when making the mold or casting parts.

    S-2529
    $245.50
  • Cast-All Casting Grade A non-aromatic casting material which will set up in 1-3 minutes. Used for casting just about anything; duck heads, duck feet, claws, teeth, novelty items, rocks, leaves, twigs, noses, earliners etc. Not to be used in algenate molds or any moisture-laden materials. Off white color. 2 one quart bottles.

    S-2595
    $38.95
  • 2 16oz Bottle Kit of Masters Blend This revolutionary product is excellent for injecting bird feet. Used by some of the leading bird taxidermists. It is a combination filler, coating and bonding agent. Very thin for good penetration. Holds natural color in feet. Reduces shrinkage and sets in 3-5 mintues! Will accept any type paint and finish beautifully. Can be worked pretty much like hard wood. Kit contains two 16 oz containers for 50/50 mix. Due to the hazardous nature of this product, Master's Blend cannot be sent through any expedited air shipments.

    S-2597
    $43.95
  • 2 8oz Bottle Kit of Masters Blend This revolutionary product is excellent for injecting bird feet. Used by some of the leading bird taxidermists. It is a combination filler, coating and bonding agent. Very thin for good penetration. Holds natural color in feet. Reduces shrinkage and sets in 3-5 mintues! Will accept any type paint and finish beautifully. Can be worked pretty much like hard wood. Kit contains two 8 oz containers for 50/50 mix. Due to the hazardous nature of this product, Master's Blend cannot be sent through any expedited air shipments.

    S-2598
    $26.95
  • Fast Cast White - 1 quart Kit This two part non-rising polyurethane resin is used to manufacture duck heads, antlers, horns or anything a person would like to cast. Used in a RTV or latex mold to create the perfect part. 50/50 mix by volume. Set-up time is 3 minutes depending on temperature.

    S-2599
    $44.95
  • Fast Cast White - 1 gallon Kit This two part non-rising polyurethane resin is used to manufacture duck heads, antlers, horns or anything a person would like to cast. Used in a RTV or latex mold to create the perfect part. 50/50 mix by volume. Set-up time is 3 minutes depending on temperature. Due to the hazardous nature of this product, Fast Cast cannot be sent via air shipments.

    S-2599-1
    $169.00
  • 1 Pound Identic Geltrate (Alginate) Packaged for the dental profession, this material is fast setting and great for making study casts, such as eye detail, noses etc.

    S-33
    $11.30
  • Latex Extender These ground rubber shavings can be mixed with your latex to give it more tear strength than you can imagine. Once you have applied your first two thin coats of latex, mix a small amount of the extender to the latex. It will not only extend the latex, but will make it much more durable.

    S-338
    $6.95
List 
Grid