Currently Shopping by

  1. Manufacturer: Wesco Remove This Item

Category

  1. Casting & Injection (7)

Manufacturer

  1. Knobloch (2)
  2. Paache (101)
  3. Wesco (7)
  4. GNS (215)
  5. Rich Art Color (5)
  6. Research Mannikins (12)
  7. Jack Richeson & Co. (6)
  8. Jim Allred Taxidermy Supply (5)

Wesco Remove This Item Paints

List 
Grid 
  • Latex-74 Gallon Mold making latex rubber of superior stength and quality. For making brush-on molds, not for pouring. One coat of this is equal to 3-5 coats of similar products. Store above 45 degrees. Not freeze-thaw stable.

    S-2427
    $64.40
  • Latex-74 Quart Mold making latex rubber of superior stength and quality. For making brush-on molds, not for pouring. One coat of this is equal to 3-5 coats of similar products. Store above 45 degrees. Not freeze-thaw stable.

    S-2428
    $28.80
  • 1 Quart Latex Relesase Dressing Used on latex rubber molds when chemically curing materials are used to cast parts. Protects rubber and allows parts to be demolded easily. Will prolong mold life.

    S-2429
    $15.95
  • Mold All-RTV Silicone - 1 pound kit High grade RTV silicone based rubber. Normal set time is 24 hours. A truly superior product to use when molding or casting a highly detailed item. Mix 1-10 by weight until consistant in color. Fast set catalyst will shorten set time down to a couple of hours if desired. Non-inhibited by sulphur, sodium or epoxies, will set up against oil clay. No release is required either when making the mold or casting parts.

    S-2528
    $37.50
  • One ounce of fast set catalyst to be used with the Mold All Kits S-2528 or S-2529.

    S-2528C
    $16.40
  • Mold All-RTV Silicone - 10 pound kit High grade RTV silicone based rubber. Normal set time is 24 hours. A truly superior product to use when molding or casting a highly detailed item. Mix 1-10 by weight until consistant in color. Fast set catalyst will shorten set time down to a couple of hours if desired. Non-inhibited by sulphur, sodium or epoxies, will set up against oil clay. No release is required either when making the mold or casting parts.

    S-2529
    $245.50
  • Cast-All Casting Grade A non-aromatic casting material which will set up in 1-3 minutes. Used for casting just about anything; duck heads, duck feet, claws, teeth, novelty items, rocks, leaves, twigs, noses, earliners etc. Not to be used in algenate molds or any moisture-laden materials. Off white color. 2 one quart bottles.

    S-2595
    $38.95
List 
Grid