Forms

Elk by Bill Lancaster,    Right Turn, Semi-Sneak, Closed Mouth,    10 1/2 x 18 1/2 x 26    Recommended eye size R17-30mm

Red Duiker: Straight, Upright  3 1/4" x 6 1/2" x 8"  Recommended eye: R25-20mm *AVAILABLE FROM OREGON ONLY*

Red Duiker: Left Turn, Upright  3 1/4" x 6 1/2" x 8"  Recommended eye: R25-20mm *AVAILABLE FROM OREGON ONLY*

Lifesize Beaver by Denver Museum    Front Elevated, Head Low, Open Mouth, Left Turn, Detailed Jaws Installed     2 1/4" x 5 3/4" x 29 1/2" x 28"     Recommended eye size:10mm

Elk (Tule) by Mike Frazier,    Straight, Full-Sneak, 10 3/4" x 18 1/2" x 27"     Recommended Eye R17-30mm

Elk (Ranch Bull) by Mike Frazier,    Straight, Full-Sneak, 12 1/2" x 20 1/2" x 29"    Recommended Eye R17-32mm

Elk (Tule) by Mike Frazier,    Head Only, Open Mouth no Jaw Installed,    Eye to Nose 10 3/4"    Recommended Eye R17-30/34mm

Elk Change Out Head (Tule) by Mike Frazier,    Head Only, Open Mouth with Detailed Jaw Installed,    Eye to Nose 10 3/4"    Recommended Eye R17-30mm

Elk (Tule) by Mike Frazier,    Head Only, Open Mouth Regular Jaw Installed,    Eye to Nose 10 1/4"    Recommended Eye R17-30/34mm

Elk by Mike Frazier,    Head Only, Open Mouth no Jaw Installed,    Eye to Nose 13"    Recommended Eye R17-34/38mm

Elk Change Out Head by Mike Frazier,    Head Only, Open Mouth with Detailed Jaw Installed,    Eye to Nose 13"    Recommended Eye R17-34/38mm

Elk by Mike Frazier,    Head Only, Open Mouth with Regular Jaw Installed,    Eye to Nose 13"    Recommended Eye R17-34/38mm

Mule Deer by Tom Weickum,    Hard Left Turn, Wall Pedestal, 7 1/2" x 13 3/8" x 22"     Recommended Eye R21-28mm

Porcupine 2 1/2 x 6 1/4 x 31 1/2 x 29 Walking, head ST Recommended eye size: 12mm

Coyote 4 1/4 x 8 1/2 x 34 x 20 1/2 Sitting, howling, Open Mouth no Jaw Installed, Recommended eye size: 18mm

Lifesize Coyote Howling Open Mouth w/ Non Detailed Jaw 4 1/4" X 8 1/2" X 34" X 20 1/2" Recommended Eye Size: 18mm

Lifesize Beaver    Swimming   2 7/8" x 6 1/4" x 27" x 30 3/4"    Recommended eye size: 14mm

Fast Cast White - 1 gallon Kit This two part non-rising polyurethane resin is used to manufacture duck heads, antlers, horns or anything a person would like to cast. Used in a RTV or latex mold to create the perfect part. 50/50 mix by volume. Set-up time is 3 minutes depending on temperature. Due to the hazardous nature of this product, Fast Cast cannot be sent via air shipments.

Lifesize Bobcat   Laying Down, Right Turn, Closed Mouth   1 7/8" x 5 3/4" x 31" x 18 1/2"    Recommended eye size: 20mm

Cougar, 3 3/4 x 9" x 55" x 37" Approximate weight 150 lbs. Laying, Head up, CM, LT, by Mike Frazier, Recommended eye size: 26mm