Category

  1. Hangers (52)
  2. Epoxies, Glues & Clays (88)
  3. Pins, Needles & Thread (80)
  4. Wire (17)

Pins, Needles, Thread

  1. Thread (9)
  2. Needles (52)
  3. Pins (15)

Manufacturer

  1. Aves (14)
  2. Wesco (15)
  3. GNS (3)
  4. Research Mannikins (2)
  5. Mohr (1)
  6. Nuton Supplies (18)
  7. Havels (28)
  8. Valco (6)

Mounting

List 
Grid 
  • Epo-Grip Ear Magic - Two 16 ounce containers Ear Magic is a time saving reinforced translucent ear adhesive designed to produce strong, flexible quality ears for the taxidermist without the mess. Ear Magic is a 50/50 mix by volume and can be easily tinted, providing application flexibility not previously found in other methods.

    S-2282
    $57.65
  • Fin Magic - Two 16 ounce units Fin Magic is a time saving, reinforced, translucent, fin making material. It is designed to produce strong, flexible fins for the taxidermist without the mess. It can also be tinted.

    S-2283
    $33.95
  • Fin Magic - Two 8 ounce units Fin Magic is a time saving, reinforced, translucent, fin making material. It is designed to produce strong, flexible fins for the taxidermist without the mess. It can also be tinted.

    S-2284
    $23.95
  • Epo-Grip Seam and Repair Putty - 1 pound Two component putty mixes easily and enables low temperature bonding and repairing. Has high adhesion and low shrinkage. This smooth, high tack putty is great for filling seams and making repairs in your taxidermy work. Can be rejuvinated if frozen. Heat in microwave for 15 seconds at a time. Stir and repeat.

    S-2290
    $20.50
  • 12ox Epo Grip Quick Repair Putty Kit A two component, non-sagging and fast setting epoxy putty adhesive that is easily mixed and can be stained. Cure occurs in less than 6-10 minutes at 77 degrees F. Contains no solvents, so there is no shrinkage. Allows for use where high performance, structural bonding is required. Shape and form with a sharp cutting tool in 15 minutes and finish sanding in approximately 30 minutes. This product can be reheated if frozen.

    S-2294
    $22.95
  • 8oz Kit Epo-Grip Slow Set #30 Paste Epo-Grip #30 paste is an opalescent, light paste epoxy resin adhesive for low temperature industrial bonding applications where high strength and minimum shrinkage is required. This versatile two component formulation is easily mixed and used and toom temperature. Initial cure time occurs in 3-4 hours at 77 degrees F. Does not run or sag when used in vertical and inverted applications.

    S-2295
    $23.95
  • 16oz Kit Epo-Grip Slow Set #30 Paste Epo-Grip #30 paste is an opalescent, light paste epoxy resin adhesive for low temperature industrial bonding applications where high strength and minimum shrinkage is required. This versatile two component formulation is easily mixed and used and toom temperature. Initial cure time occurs in 3-4 hours at 77 degrees F. Does not run or sag when used in vertical and inverted applications.

    S-2296
    $34.95
  • 32oz Kit Epo-Grip Slow Set #30 Paste Epo-Grip #30 paste is an opalescent, light paste epoxy resin adhesive for low temperature industrial bonding applications where high strength and minimum shrinkage is required. This versatile two component formulation is easily mixed and used and toom temperature. Initial cure time occurs in 3-4 hours at 77 degrees F. Does not run or sag when used in vertical and inverted applications.

    S-2297
    $54.20
  • Extra Fine Jeweler's Grade Excelsior - One pound Ideal for wrapping bird necks, wings, legs and extra small animal bodies. Specify number of pounds needed.

    S-230A
    $5.95
  • Excelsior - 5 pounds Unmatched for wrapping bird or mammal bodies. Made from medium-grade basswood.

    S-230B
    $12.95
  • Bonded Ear Kit Includes: 1 quart Body Filler, 1 quart Resin, and 2 pounds Chopped Fiberglass. Complete instructions included. One kit will do 12-15 ears.

    S-231
    $54.95
  • Chopped Fiberglass - 4 pounds Quarter inch chopped strand. Perfect for use in the bonded ear method.

    S-232
    $19.95
  • Apoxie Clay - 1 Pound Kit Apoxie Clay is a permanent, self-hardening, waterproof clay product which can be modeled and shaped when wet and finished after set-up with sanders, drills, files, etc. A two-part system mixed equally in volume.

    S-233
    $18.25
  • Pre-Mixed Skin Paste - One gallon Dextrine-based substance to be applied directly to the mannikin. Paste has a five month shelf life.

    S-234
    $28.25
  • Pre-Mixed Skin Paste - 5 gallons Dextrine-based substance to be applied directly to the mannikin. Paste has a five month shelf life. This quantity is Drop Shipped only and will incur separate freight charges.

    S-234A
    $108.25
  • One Gallon Fiberglass Resin This high grade fiberglass resin is great for sand or soil base work. Add to auto body bonding epoxy to thin it. Has many uses in your taxidermy studio. Comes with catalyst.

    S-235
    $34.67
  • Magic Sculpt- Natural    1 Pound Kit    Magic Sculpt is a two-part epoxy putty specifically designed to meet the needs of modelers, crafters and sculptors alike. It has a 3 hour dry time and is one of the only epoxies that will smooth out with water.

    S-238
    $15.40
  • 1 Pound Kit Magic Sculpt - Brown Magic Sculp is a two-part epoxy putty specifically designed to meet the needs of modelers, crafters and sculptors alike. It has a 3 hour dry time and is one of the only epoxies that will smooth out with water. Its grain structure is finer than any other product available and will not shrink or crack even when formed in large structures. It can be shaped by hand or with modeling tools, sanded, carved, and painted. You can attack it with a grinding tool and the cured material will not break apart or lose its shape. Magic Sculp will cure at room temperature. The new improved formula is non-crystallizing so it stays soft and ready to use. Should last a life time.

    S-238B
    $15.40
  • Magic Sculpt - Flesh    1 Pound Kit    Magic Sculpt is a two-part epoxy putty specifically designed to meet the needs of modelers, crafters and sculptors alike. It has a 3 hour dry time and is one of the only epoxies that will smooth out with water.

    S-238F
    $15.40
  • Magic Sculpt - Natural    5 Pound Kit    Magic Sculpt is a two-part epoxy putty specifically designed to meet the needs of modelers, crafters and sculptors alike. It has a 3 hour dry time and is one of the only epoxies that will smooth out with water.

    S-239
    $39.95
List 
Grid